The Comprehensive Target Shooting & Firearms Terminology Glossary

Precision marksmanship possesses a rich, technical language derived from mechanical engineering, internal and external ballistics, sports biomechanics, and international regulatory codices. Whether you are analyzing shot dispersion on an electronic target, adjusting diopter apertures for optical depth of field, or setting the sear engagement on a two-stage match trigger, understanding standard firearms and shooting terminology is fundamental to communicating effectively with coaches, gunsmiths, and fellow athletes. At InRecoil, we have curated this master reference glossary to serve as the definitive educational dictionary for competitive target shooters.

A • B • C • D • E • F • G • H • I • J • K • L • M • N • O • P • Q • R • S • T • U • V • W • X • Y • Z

A

Action:
The internal mechanical assembly of a firearm that loads, chambers, fires, extracts, and ejects cartridges or pellets. Common competition action designs include bolt-action (match rifle), semi-automatic/blowback (rapid fire pistol), break-action over/under (trap and skeet shotgun), and falling-block or side-lever pneumatic/pre-charged pneumatic (air guns).
Aperture Sight (Diopter):
A target sighting system featuring a rear disc with a pinhole opening and a front globe housing an interchangeable ring or post insert. Looking through the rear aperture causes the eye’s visual pupil to automatically self-center the front globe without conscious optical alignment, creating concentric optical circles with the target bullseye.
Arc of Movement:
The inevitable, continuous oscillation of the firearm’s sights across the aiming area caused by heartbeats, postural muscle tremors, and breathing. Elite athletes train to shrink this oscillation into their Minimum Arc of Movement rather than attempting to freeze the gun completely.
Autogenic Training:
A psychophysiological relaxation technique used by shooting athletes to lower sympathetic nervous system arousal, stabilize resting heart rates, and induce vasodilation in the extremities prior to stepping onto the firing line.

B

Ballistic Coefficient (BC):
A mathematical measure of a projectile’s aerodynamic efficiency and ability to overcome atmospheric drag in flight relative to a standard projectile model (G1 or G7). Projectiles with higher BC values retain velocity better and suffer less wind drift at long distances.
Bedding (Pillar / Glass Bedding):
The precise fitting of a rifle’s metal barreled action into its stock using epoxy resin or aluminum pillars. Proper bedding ensures 100% stress-free contact, preventing harmonic distortion and shifting points of impact under thermal variations.
Biathlon:
An Olympic winter sport combining cross-country skate skiing with precision rifle shooting (.22 LR) at 50 meters in prone and standing positions under severe cardiovascular exertion.
Bore:
The interior cylindrical channel of a firearm or air gun barrel through which the projectile passes upon firing. Rifled bores feature spiral grooves, whereas shotgun bores are smooth.
Buttplate & Hook:
The rear component of a rifle stock that interfaces with the shooter’s shoulder. In competitive three-position match rifles, the buttplate is multi-axis adjustable for length of pull, cant, drop, and includes a lower metal hook to anchor the rifle into the armpit in standing and kneeling positions.

C

Cant:
The lateral tilting or angular rotation of a firearm along its longitudinal bore axis away from vertical plumb. Canting a rifle or pistol alters the geometric relationship between the line of sight and the trajectory, causing shots to impact low and toward the direction of cant.
Cast (Cast-Off / Cast-On):
The lateral lateral offset of a shotgun or rifle stock’s butt away from the bore centerline. Cast-off bends the stock to the right (for right-eyed/right-handed shooters), aligning the eye directly over the rib; cast-on bends the stock to the left for left-handed athletes.
Chamber Safety Flag (CSI / CBI):
A brightly colored plastic probe and flag inserted into the open chamber of a firearm or air gun to physically block the bolt and visibly confirm to range officers that the weapon is completely safe and unloaded. Mandatory under all InRecoil Firearm Safety Protocols.
Choke:
A conical constriction at the muzzle end of a shotgun barrel designed to regulate the spread and density of the shot pellet pattern. Standard constrictions include Cylinder, Improved Cylinder (IC), Modified (M), Improved Modified (IM), and Full (F).
Chronograph:
An electronic or radar instrument used to measure the muzzle velocity (feet per second or meters per second) of projectiles, essential for calculating external ballistics, standard deviation (SD), and extreme spread (ES).

D

Diopter:
1. A unit of optical power equal to the reciprocal of focal length in meters. 2. A precision aperture rear sight system used in ISSF 10m air rifle, 50m smallbore, and 300m high-power competition with micrometer click adjustments.
Distal Joint:
The outermost knuckle joint of the index finger. In precision pistol marksmanship, trigger force is applied exclusively through the distal phalanx pad, keeping the middle and proximal joints free from lateral frame contact.
Double-Action (DA):
A trigger mechanism where a single press of the trigger cock-and-releases the hammer or striker. Contrasted with Single-Action (SA), where the hammer must be manually cocked or set prior to trigger release.
Drop at Comb / Drop at Heel:
The vertical measurement from the projected sight plane or barrel rib down to the front edge of the stock comb and the rear heel of the buttplate, dictating cheek weld height and eye alignment.
Dry Firing:
The intentional release of the cocked trigger mechanism on an empty chamber (or using an internal dry-fire catch) without live ammunition. The cornerstone of deliberate practice to ingrain pure trigger finger isolation and sight tracking.
Dwell Time:
The microscopic duration between the initial ignition of the cartridge primer (or air release) and the projectile’s physical exit from the muzzle crown. Longer dwell times amplify the necessity of unwavering follow-through.

E

Electronic Scoring Target (EST):
A modern target system (e.g., SIUS Ascor, Meyton, Megalink) utilizing acoustic sonic sensors, optical laser curtains, or rubber scroll bands to triangulate projectile impact coordinates down to tenth-of-a-millimeter precision, displaying instantaneous digital scores to athletes and spectators.
Elevation:
The vertical adjustment on a firearm sight or optic to correct for bullet drop, trajectory arc, and vertical point of impact on the target.
Eye Dominance:
The natural neurological tendency of the brain to prioritize visual sensory input from one eye over the other. Cross-dominance (e.g., right-handed with a left-dominant eye) requires specialized blinder setups, cant adjustments, or modified head positions.
Eye Relief:
The optimal distance from the shooter’s cornea to the rear ocular lens of a scope or rear aperture disc to obtain a full, shadow-free sight picture.

F

Flinch:
An involuntary muscular contraction or sudden jerking motion of the shoulder, wrist, or hand immediately prior to shot discharge, caused by subconscious anticipation of loud muzzle blast and sharp recoil.
Follow-Through:
The deliberate continuation of all shooting fundamentals—maintaining stance, grip pressure, trigger compression, respiratory pause, and focal eye fixation—for 1.5 to 2.0 seconds after the shot has discharged to prevent premature breakdown of the position while the bullet traverses the barrel.
Free Pistol (50m Pistol):
A historic Olympic men’s ISSF discipline shot at 50 meters with single-shot .22 LR pistols featuring wrap-around anatomical orthopedic grips, hairpin hair-triggers (often set under 50 grams), and no weight or dimension restrictions.
Front Sight Focus:
The visual principle in iron sight marksmanship where optical accommodation is fixed exclusively on the crisp, sharp edges of the front sight post, allowing the rear notch and distant target bullseye to remain slightly blurred.

G

Grain:
A traditional unit of mass used to measure projectile weight and gunpowder charges (1 pound = 7,000 grains; 1 gram = 15.432 grains).
Grip Angle:
The rake angle formed between the handgun barrel axis and the centerline of the grip frame. Anatomical match pistols utilize steep grip angles (often 105 to 115 degrees) to lock the wrist joint into natural skeletal camming alignment.
Grouping:
The physical pattern and clustering of multiple bullet or pellet holes fired at a single target from a consistent point of aim, used to diagnose firearm mechanical accuracy and shooter hold consistency.

H

Hangfire:
An unexpected, hazardous delay between the firing pin striking the cartridge primer and the actual ignition of the propellant. Safe protocol requires keeping the muzzle pointed strictly downrange for at least 30 seconds before opening the action.
Headspace:
The critical mechanical distance measured from the breech face of the bolt to the datum line or shoulder in the chamber that supports the cartridge case when seated.
Hold / Holding Power:
The athlete’s capacity to maintain the firearm stably within the target aiming area with minimal oscillation during the shot delivery window.

I

Iliac Crest:
The upper curved margin of the human pelvic ilium bone. In standing rifle positions, the support arm elbow rests directly on the iliac crest to form an unyielding skeletal bone column.
Iris Diaphragm:
An adjustable circular mechanical aperture incorporated into rear sights or shooting glasses that allows micro-adjustment of aperture hole diameter (typically 0.5mm to 3.0mm) to optimize depth of field and optical contrast under fluctuating range lighting.
ISSF:
The International Shooting Sport Federation, the governing body recognized by the International Olympic Committee (IOC) for Olympic and World Championship rifle, pistol, and shotgun disciplines.

K

Kneeling Roll:
A firm, cylindrical leather, canvas, or synthetic bag filled with cork, sawdust, or synthetic pellets, placed beneath the instep of the rear ankle in competitive kneeling rifle positions to provide stable pelvic support.

L

Lead (Forward Allowance):
In shotgun and dynamic moving-target shooting, the necessary forward distance aimed ahead of a moving clay or target to allow the shot charge and target to intersect simultaneously in flight.
Length of Pull (LOP):
The physical distance measured from the center of the trigger shoe to the center of the buttplate, dictating arm reach, head position, and shoulder interface.
Lock Time:
The time elapsed between the mechanical sear release and the firing pin impact on the primer. Shorter lock times (typically 1.5 to 4 milliseconds in match rifles) reduce the opportunity for shooter tremor to displace the shot.

M

Match Rifle:
A specialized competition rifle engineered for maximum mechanical precision, featuring heavy match-grade barrels, fully adjustable ergonomic stocks, two-stage match triggers, and micrometer aperture diopter sights.
Minimum Arc of Movement:
The smallest stability envelope achievable by a human athlete while aiming, governed by cardiovascular pulse, postural sway, and neuromuscular control. Explored fully in our Minimum Arc of Movement Guide.
Minute of Angle (MOA):
An angular measurement equal to 1/60th of a degree, subtending approximately 1.047 inches at 100 yards (or 2.908 cm at 100 meters), widely used for sight adjustments and accuracy grouping standards.
Muzzle Crown:
The precision-machined, recessed contour at the absolute exit point of the barrel bore, critical for ensuring uniform gas escape around the base of the departing bullet.

N

Natural Point of Aim (NPA):
The exact physical direction in which a firearm naturally aligns when the shooter assumes their stance, closes their eyes, takes several deep breaths, and relaxes all non-essential skeletal muscles. Fundamental to eliminating subconscious steering. Study the mechanics in our Natural Pistol Position Guide.

O

Optical Parallax:
The apparent positional shift of the target reticle or front sight relative to the target image when the shooter moves their eye off the optical center axis of the sighting system.

P

Periodization:
The systematic structuring of competitive training into macrocycles, mesocycles, and microcycles to achieve peak performance at designated championship events while preventing burnout. Read our complete Shooting Sports Training Architecture Guide.
Pistol Grip Putty:
Two-part epoxy putty (e.g., Morini or Rink grip wood paste) applied to anatomical wooden pistol stocks to customize the grip geometry to the athlete’s exact hand contours.
Propellant:
The low-explosive chemical compound (smokeless nitrocellulose powder) contained within a cartridge case that deflagrates upon primer ignition, generating high-pressure gas to propel the bullet down the bore.

Q

Quiet Eye:
A critical sports science phenomenon: the final fixation or tracking gaze of the athlete’s eye onto the front sight or target immediately prior to motor initiation. World-class marksmen exhibit longer, quieter eye durations (typically 1.5 to 2.5 seconds) than novice shooters.

R

Rapid Fire Pistol (25m):
An Olympic men’s ISSF discipline where athletes fire 5 shots at 5 separate turning electronic targets at 25 meters in rapid series of 8, 6, and 4 seconds.
Respiratory Pause:
The natural cessation of lung breathing after a passive exhalation, creating an 8 to 10-second physiological window of minimal torso movement and optimal heart rate stability for shot execution.
Rifling:
Spiral helical grooves machined into the interior surface of a barrel that impart gyroscopic spin to the bullet, stabilizing it along its flight trajectory.

S

SCATT:
An optoelectronic infrared training system mounted beneath a firearm barrel that records the precise aiming trajectory, approach velocity, hold stability, and trigger break point onto computer software for diagnostic analysis.
Sear:
The internal mechanical catch in a trigger mechanism that holds the hammer or striker back at full cock until released by the movement of the trigger.
Sight Alignment:
The exact geometric spatial relationship between the front sight and rear sight (e.g., front sight post centered vertically and horizontally within the rear sight notch with equal light bars on either side).
Sight Picture:
The composite visual image obtained by placing the perfectly aligned front and rear sights into proper relationship with the target bullseye (e.g., center hold or sub-six o’clock hold).
Sling (Target Rifle Sling):
A heavy leather or synthetic strap attached around the upper bicep of the support arm and anchored to the rifle’s fore-end rail via a hand-stop, replacing muscular tension with an unbreakable non-elastic tension loop in prone and kneeling positions.
Squib Load:
An extremely dangerous ammunition malfunction where insufficient powder fails to push the bullet out of the barrel, leaving it lodged in the bore. Firing another cartridge behind a squib causes catastrophic barrel rupture.
Standard Pistol (25m):
A premier ISSF handgun discipline fired at 25 meters with .22 LR rimfire pistols consisting of 60 competition shots divided into 150-second, 20-second, and 10-second rapid series. Learn the match drills in our Standard Pistol Exercises Guide.

T

Trigger Creep:
Noticeable, uneven, or gritty mechanical movement of the trigger after the first stage take-up has been reached but before the sear cleanly disengages.
Trigger Weight:
The minimum force (measured in grams or ounces) required to trip the sear and release the firing mechanism. ISSF rules mandate strict minimum weights (e.g., 500g for 10m Air Pistol; 1000g for 25m Standard and Sport Pistol).
Twist Rate:
The barrel rifling pitch, expressed as one full revolution per number of inches (e.g., 1:8″ twist means the bullet completes one full rotation every 8 inches of bore travel).

W

Wadcutter:
A flat-nosed cylindrical bullet or lead air gun pellet specifically designed to punch clean, cookie-cutter circular holes through paper targets for unambiguous score calibration.
Windage:
The horizontal lateral adjustment on a sighting system to compensate for crosswinds or horizontal point-of-impact displacement.

Z

Zeroing:
The process of adjusting a firearm’s sights or optical reticle so that the point of impact (POI) coincides precisely with the point of aim (POA) at a specified distance under zero-wind baseline conditions.

Continue Expanding Your Technical Knowledge

Marksmanship terminology comes alive when practiced on the firing point. Learn how these concepts apply to your training program by exploring our Technical Basics Hub, review range rules in our Firearm Safety Protocols, or master handgun mechanics in the Technical Pistol Section.

[box]

Suggest a Technical Term

Is there a ballistic, mechanical, or match rule term you would like added to the InRecoil dictionary? Reach out to our coaching staff via our About InRecoil page or submit suggestions through our Contact Page.

Return to Technical Basics Explore Technical Pistol
[/box]